Yukiwa Side Spindle

  • Functions and features
    • Side spindle SS series are used to support an end of a jig when multi-side machining is done on a work piece with jigs like hummock-type.
    • Spindle is pushed forward by the disc spring, which enables the structure to absorb a slight displacement between the table and jig plate in the axial direction.
    • Spindle only, clamping mechanism is not built-in.
    • Due to grease lubrication, oil replenishment is not necessary.

SS110 SS135 SS160 SS200
Works with JNC140 JNC170, YNCP170 JNC200, YNCP200 JNC250, YNCP250
Center Height 110mm 135mm 160mm 200mm